Ankai HFF6850G03CHEV11 Plug-in Bus (Diesel/Electric Hybrid, National V Emission Standard, 10-28 Seaters)
The Ankai HFF6850G03CHEV11, a plug-in hybrid bus launched in 2025, features an 8.5-meter body design and flexible seating arrangements of 10-28 seats. Designed for urban feeder routes, community microcirculation, and scenic spot shuttles, this bus combines the advantages of diesel and electric power. Equipped with a hybrid system consisting of a Yuchai YC4EG National V diesel engine and a permanent magnet synchronous motor, it boasts fuel consumption as low as 16L/100km under comprehensive operating conditions and a pure electric range of 50km.
2025 Core Upgrade Highlights
Powertrain Optimization: Utilizing a fourth-generation hybrid control strategy, the bus achieves seamless switching between the diesel engine and electric motor, improving overall energy efficiency by 12%. A new intelligent charging mode allows for rapid battery recharge using brake energy recovery.
Enhanced environmental performance Equipped with a dual exhaust treatment system (DPF+SCR), particulate matter emissions are reduced by 30% compared to the National V standard, meeting the requirements for exemptions from environmental restrictions in key areas.
Intelligent Configuration Standardly equipped with the Ankai i-Pilot intelligent driving assistance system, including lane departure warning and accidental accelerator pedal protection. Higher-end models can be equipped with an optional intelligent dispatch terminal, which supports real-time monitoring of charging station availability.
Enhanced Passenger Experience Featuring a low-floor design with a step-through mechanism and wheelchair securement. The interior is upgraded with antibacterial seat fabric, and the air conditioning system has added PM2.5 filtration.
Vehicle Configuration Differences
Basic Edition: Focuses on economy, equipped with a mechanical suspension and steel wheels, suitable for frequent short-distance connections.
Flagship Edition: Upgraded with air suspension and leather seats, adding USB charging ports and in-car Wi-Fi, targeting the tourist charter market.
The Ankai HFF6850G03CHEV11 plug-in bus (diesel/electric hybrid, National V, 10-28 seats) has been put into operation in more than 20 cities in China. Its modular hybrid architecture supports the rapid replacement of larger capacity battery packs, leaving room for future technological upgrades.
Vehicle parameters/information
|
Announcement Model
|
HFF6850G03CHEV11
|
use
|
Public buses
|
Body length
|
8540mm
|
Body width
|
2350mm
|
Ride height
|
3050,3150mm
|
Vehicle quality
|
8200,8600kg
|
Total mass
|
12700kg
|
Body structure
|
Full load
|
Number of seats
|
67/12-28,61/12-28
|
Maximum speed
|
69km/h
|
Engine/motor parameters
|
engine
|
YNF40E1
|
Engine power
|
125kW
|
displacement
|
3920mL
|
Engine brand
|
Kunming Yunnei Power Co., Ltd.
|
Emission standards
|
GB17691-2005 National V, GB3847-2005
|
Chassis parameters/configuration
|
Chassis model
|
Unibody
|
Front and rear suspension
|
1930/2370mm
|
Suspension system
|
3 front leaf springs, 4 rear leaf springs
|
Number of springs
|
3/4
|
Number of axes
|
2
|
wheelbase
|
4240mm
|
Axle load
|
4300/8400kg
|
Front track
|
1956mm
|
rear track
|
1745mm
|
Approach departure angle
|
7/7°
|
tire
|
Number of tires
|
6
|
Specification
|
9R22.5,8.25R20
|
