Ankai HFF5130XLH5 training vehicle (diesel National V 10-23 seats)

Ankai HFF5130XLH5 Training Vehicle (Diesel National V Emission Standard, 10-23 Seaters)

The Ankai HFF5130XLH5 training vehicle is a diesel-powered, specialized training vehicle that meets the National V emission standards. Its dimensions are 5545×1900×2640mm (narrow body design), with a wheelbase of 3300mm, a curb weight of 3680-3790kg, a gross vehicle weight of 5300kg, a top speed of 80km/h, and a rated passenger capacity of 10-23. This vehicle is equipped with the JAC Chaochai HFC4DF1-2D1 diesel engine (2.5L displacement, 82kW/112 horsepower), an LC5T28 transmission, 215/75R16 tires, front disc and rear drum brakes, and power steering.

Core Features

Safety Features: Full-vehicle surveillance system (one with five cameras), reverse voice alarm, driver emergency switch control system, and school bus signage

Comfort Features: Songzhi built-in air conditioning, non-slip floor coverings, electric parking signal arm, patrol system, and cartoon seats (seat thickness exceeds national standards)

Chassis Parameters: Front/rear overhang 945/1500mm, 3/4 leaf springs, axle load 2400/2900kg, minimum turning radius suitable for urban and rural roads

Model Features

Rideability: A narrow body (1.9 meters wide) and short wheelbase design adapt to complex road conditions.

Teaching Aids: Standard features include a first aid kit, electric fan, and driver's sunshade; an optional auxiliary brake pedal for instruction is available.

Economy: Fuel consumption is approximately 12L/100km (estimated based on data from similar diesel training vehicles).

The Ankai HFF5130XLH5 training vehicle is suitable for driving school training. The 2025 model features optimized engine ECU programming, improved low-speed torque response, and a new interface for student behavior recorders.

Vehicle parameters/information
Announcement Model	HFF5130XLH5
use	Special passenger car
Body length	9010mm
Body width	2420mm
Ride height	3120,3220mm
Vehicle quality	8350kg
Total mass	13000kg
Number of seats	10-23
Maximum speed	69km/h
Engine/motor parameters
engine	YC6J200-50
Engine power	147kW
displacement	6500mL
Engine brand	Guangxi Yuchai Machinery Co., Ltd.
Emission standards	GB17691-2005 National V, GB3847-2005
Chassis parameters/configuration
Chassis model	HFC6880KY1V Category III Anhui Jianghuai Automobile Group Co., Ltd.
Front and rear suspension	2085/2725mm
Number of springs	5/5
Number of axes	2
wheelbase	4200mm
Axle load	4400/8600kg
Front track	1950mm
rear track	1800mm
Approach departure angle	9/8°
tire
Number of tires	6
Specification	9.00R20