5Ton 55KW All-terrain Off-road Small Diesel Forklift

5Ton 55KW All-terrain Off-road Small Diesel Forklift is an industrial handling equipment that focuses on practicality and reliability. Its core parameters and design features are as follows:

1. Core parameters

Rated lifting capacity

The standard load capacity is 3 tons, which meets the needs of conventional heavy material handling.

Power system

Equipped with a diesel engine (specific model is not disclosed), with a rated power of approximately 36.8kW, providing stable power output.

Lifting height

The standard mast lifting height is 3 meters, and 4 meters, 4.5 meters masts or three-level masts are optional to adapt to different operating scenarios.

Key dimensions

The overall size of the machine is approximately 4200×1850×2600mm (excluding forks), and the compact structure takes into account flexibility and passability.

Tire configuration

Use large-size 20.5/70-16 off-road tires to enhance ground adaptability.

2. Core advantages

Off-road performance

The four-wheel drive system combined with the articulated frame design has a minimum ground clearance of ≥300mm and a rear departure angle of ≥30°, which is suitable for complex terrains such as slopes and gravel roads.

Safety design

Standard safety belts, guardrails and intelligent fault diagnosis systems ensure operational safety.

Reliability

The reinforced drive axle and wheel-side planetary gear reduction structure are used to improve component durability.

Convenient maintenance

The modular design simplifies the maintenance process and reduces long-term operation and maintenance costs.

3. Optional accessories (expanded functions)

Supports rapid replacement of a variety of accessories, including:

Side shifter (3t/5t), clamp (arc/soft), wood grabber;

Tipping device, multi-function bucket, simple boom, etc.;

Meet the handling needs of special materials such as wood, pipes, and bulk materials.

4. Applicable scenarios

This all-terrain off-road small diesel forklift is mainly used in construction sites, warehousing and logistics, wood processing plants and other scenarios that require both handling efficiency and passability in complex terrain.

Product Parameters
Engine Brand	National III engine (model and brand optional)
power	40-55KW
Axles	Rear steering drive axle
Gearbox	280 dual high and low speed
tire	Pneumatic tires
Standard lifting height (profile width)	3m-4.5m (all in one)
Maximum climbing ability	16°≤30°
Ground Clearance	280㎜
Ground clearance of front section of mast	300㎜
Wheelbase	1697㎜
Minimum turning radius	4200㎜
Drive Mode	Four-wheel drive
Machine weight	5 tons
Machine size (excluding forks)	3238*1500*2380㎜
Optional Configuration	3T side shifter; upper three-claw pressure cap; simple boom; 5T side shifter; clamp (arc); flat bucket; lower tilter; soft clamp (flat); tilting wood grabber; upper and lower tilting grabber; multi-function bucket (complete set); steel pipe clamp