1.t Ton All-terrain Off-road Small Pure Electric Forklift

1.t Ton All-terrain Off-road Small Pure Electric Forklift is an electric forklift used for industrial handling, suitable for loading and unloading, stacking and short-distance transportation of palletized goods. This forklift belongs to the category of industrial vehicles, mainly battery-driven, and the design focuses on the balance of practicality, safety and energy efficiency. The following is a detailed introduction and related parameters:

Rated lifting capacity

1.5 tons, suitable for standard pallet cargo handling needs.

Lifting height

The standard height is 3 meters, supporting customized options, and can be lifted up to 6 meters (under customized conditions), but it should be noted that the load capacity drops to about 130 kilograms at the highest lift.

Equipment size and weight: The overall dimensions (length × width × height) are 2330 mm × 1200 mm × 2150 mm; the whole machine weighs 2150 kg (about 2.15 tons), and the standard length of the fork is 1220 mm.

Power and endurance

Working voltage is 60 volts, with 5 Chaowei maintenance-free batteries as standard, battery capacity is 70 ampere hours, and can work continuously for 4 to 6 hours when fully charged; equipped with Chongqing Kecheng drive motor and lifting motor, each with 3000 watts of power, providing stable power output.

Walking and handling characteristics

Minimum ground clearance is 9.5 cm to ensure passability; wheelbase is 1580 mm, front wheel width is 1030 mm, rear wheel width is 870 mm; tire specifications are 650-10 for the front wheel and 500-8 for the rear wheel; climbing ability is 15% when empty and 13% when fully loaded, suitable for operations on different slopes.

Mast and safety configuration

The mast type adopts 12# national standard C-shaped steel, with an inclination range of 6° to 12°; equipped with safety protection mechanisms such as anti-skid braking system, tilt sensor and anti-collision device to ensure safe operation.

High efficiency and energy saving

Compared with traditional fuel forklifts, the electric drive system has lower energy consumption. Combined with the intelligent battery management system, it can monitor the battery status in real time, reduce operating costs and reduce environmental pollution.

Easy to operate

Precise joystick and flexible steering system design improve operator efficiency and shorten training cycle.

Easy maintenance

Simple structure, easy daily maintenance, key components such as electrical and hydraulic components are imported to extend service life.